FAQs
- First of all, unplug the power cords of your modem and router.
- Connect your Router, modem and computer using a cable.
- Plug in the modem to an electrical socket.
- After that, reconnect the power of your WiFi router.
- Launch a browser and type 192.168.1.1 in the address bar.
- Log in to the router using a valid username and password.
- The Genie Setup Wizard will open.
- Select Yes after clicking on the Next button.
- Finally, the configuration page displays.
Here, you can make the setting changes as per your requirements. In case you find any difficulty while configuring your Router, chat with us on our experts and let proficient technicians root out all your issues.
You can use the Nighthawk app to install your router and to connect to the internet. Nighthawk app is available for both iOS and Android. Let’s see how I can install the router using Nighthawk app:
- Attach the provided antennas to your router.
- Connect the modem to the internet port on your router.
- Turn on your router.
- Wait for the router LED to light.
- Go to the App Store or Play Store and find Nighthawk app and download it.
- Open the device and tap Settings > WiFi and find and connect to your router’s network.
- Open the Nighthawk app.
- Follow the on-screen instruction to install the router and to connect the internet.
To troubleshoot internet connectivity issue on your WiFi router, you can follow the below-mentioned steps:
- First of all, try to disconnect your router and reconnect it to the internet connection after a few minutes.
- Make sure that all the cables are attached.
- Ensure that the router LED is lit.
- If you are using a wired connection, make sure that LEDs for the ports with cables are lit. If LED with port Ethernet is not lit, then try to fix this problem by moving the cable to the different port on the back of the router.
- In case you are still not able to access the internet, you can perform a factory default reset on your WiFi router.
- Make sure that the router gets valid IP address under ‘Router Status’.
- Contact our highly-experienced technicians.
To access the Nighthawk login page for your Nighthawk pro gaming router:
- Launch a web browser from a computer or mobile device that is connected to your router’s network.
- Type routerlogin.net in the address bar and hit enter key.
- The Nighthawk login window displays.
- Enter the router admin username and password.
- Finally, click on the Login button.
In this way, you can log in to your Nighthawk WiFi router.
By default, routers come with a username and password to access the admin page. These default login credentials help in Router Setup process. The default admin username and password can be changed as per your choice. Go through the instructions given below to get the job done:
- Make sure that your router is plugged in an active power source.
- Connect the router to modem.
- Open the Smart Wizard page.
- The basic welcome screen appears.
- Click on the Set Password option.
- Enter old password and then the new one.
- Re-type new password for security purpose.
That’s it. The router admin password has been changed. But don’t forget to write down the password in a sticky note for future purpose. For any kind of technical assistance regarding the process, make sure to contact our experts.
Oftentimes, users complain about ReadySHARE not working on their routers. ReadySHARE may stop working on Windows 10 or Windows 7. In addition, you also might not be able to access the USB hard drive from a Mac computer if you get this error. There are some expert-approved techniques for resolving the issue. We can help you get rid of it as quickly as possible.
The Nighthawk Router takes your existing internet connection and makes it wireless so you can enjoy WiFi access in your business. Follow this guide to learn how to set up your Nighthawk WiFi router:
- Remove the cap from each antenna and then attach the antennas to the router.
- Unplug your modem from power to turn it off.
- If the modem has a battery backup, remove the battery from the device.
- Connect the Ethernet cable to the router.
- Connect another end of the Ethernet cable to the modem.
- Plug the modem into power to turn it back on.
- Wait for the router’s power light to turn solid white.
- Connect any WiFi-enabled device to the router’s WiFi network.
- Open a web browser and wait for the genie to automatically load.
- If the genie does not load, visit 192.168.1.1.
- If prompted, log in with the admin username and password.
- Follow the on-screen prompts to finish setting up the Nighthawk router.
Most likely, there’s an inaccurate connection or incorrect settings on the computer. Therefore, the router needs to be connected to a computer via a network cable. Also, check the cable connections of your router.